Description
Purpose: to transform rust, up to 100 microns thick, on the surface of ferrous metal into a protective phosphate layer before painting. With intensive
the rubbing converter can absorb rust up to 350 μm thick. Do not use for galvanized and non-ferrous metals.
Properties: turns rust into a dense phosphate anti-corrosion film, which improves the adhesion of paint and varnish materials. Zinc oxide additionally forms an electrochemical barrier that slows metal corrosion.
Method of application: remove dirt, loose rust and oily contamination from the treated surface. Apply the converter by pneumatic spray, brush or roller until the surface is wet. If necessary, repeat the application. After 24 hours, wash with water. After the surface dries, you can apply paint and varnish. Work at a temperature not lower than +5°C.
Precautions, conditions of safe storage, use: Caustic substance! Work with the converter should be carried out with skin and eye protection in a well-ventilated room. Transport and store in a hermetically sealed container without temperature regime requirements. Protect from direct sunlight and heat. Do not give to children, do not use internally!
Composition: water. orthophosphoric acid, zinc oxide (inhibitor), sodium tripolyphosphate.
